Safety
Maintain a safe and healthy environment in and out of the water. Human life and environmental protection take precedence over commercial pressure.
Established 2014 · Canada-wide capability
About Ven-Tech.
Built for difficult work.
About Ven-Tech Subsea is a story of commercial diving discipline expanded through robotics, UAS and survey technology—one Canadian field partner for complex assets above, below and at the waterline.
2014Established
07Operating locations
04Integrated disciplines
CANationwide support
Who we are
Field experience.
Modern capability.
Ven-Tech was built around a simple idea: understand the asset, control the work and deliver evidence the client can use.
Established in 2014, Ven-Tech Subsea Inspections is a Canadian commercial diving and ROV company supporting underwater inspection, construction, reservoir, robotic and survey projects. The organization has grown beyond traditional diving by integrating ROVs, pipe crawlers, confined-space platforms, UAS, LiDAR, sonar and surface-vessel systems. That breadth gives owners and engineers a practical choice of methods while keeping planning, safety, field execution and reporting connected.
About every Ven-Tech project is a defined outcome: a verified condition, a completed repair, a cleaned asset, an accurate model or a documented route to the next decision.
Safety-led planningQualified field personnelDecision-ready deliverables
About Ven-Tech · company film
Meet the team.
See the capability.
This detailed company overview brings Ven-Tech’s people, equipment, field environments and operating philosophy together in one story. Watch how commercial diving experience and advanced robotic technology support difficult infrastructure projects.
01 / COMPANY OVERVIEWAbout Ven-Tech Promo Video 2025
Commercial diving · ROV systems · inspection technology · project execution
About our capabilities
One company.
Four disciplines.
Ven-Tech combines human capability and remote systems so each project can use the method best suited to the asset and risk.
01↗Commercial diving
Underwater inspection and NDT, construction, repair, industrial diving, cathodic protection, salvage and specialized field operations.
02↗Reservoir services
Potable-water and fire-water inspection, cleaning, maintenance and condition documentation using diver and robotic methods.
03↗Robotics & ROV
ROV inspection, pipe crawlers, confined-space platforms, sonar, robotic cleaning and remote access to complex infrastructure.
04↗UAS & survey
Aerial inspection, LiDAR, mapping, thermal imaging, photogrammetry, USV, hydrographic and geophysical survey support.
About integrated operations
Use the right tool.
Keep one accountable team.
A diver, ROV, crawler, drone or survey platform may each answer a different part of the same asset problem. Ven-Tech can evaluate those options together, reduce handoffs and organize the resulting field evidence around one project objective.
- 01 Define the question before selecting the equipment
- 02 Compare access, risk, measurements and operating constraints
- 03 Integrate complementary methods where they improve coverage
- 04 Deliver traceable records for engineering and maintenance review
About our operating values
What guides
the work.
These values shape decisions in the office, during mobilization and at the worksite.
Quality
Plan and deliver work against the applicable scope, standard, procedure and acceptance criteria, with records that support review.
One-Team
Put collective capability ahead of individual success, communicate clearly and coordinate people, equipment and disciplines around the mission.
Focus
Understand the client’s actual need, protect critical constraints and keep the field effort aligned with the outcome that matters.
QHSEPeople · environment · asset
About quality, health, safety & environment
Safety is a
management system.
Ven-Tech’s QHSE approach connects company policy with project-level planning and field behaviour. Applicable statutory requirements, standards, client procedures and project specifications are reviewed before work begins. Employees, contractors and partners are expected to follow the approved procedures and protect people, the worksite, equipment and the environment.
01
Plan and assessScope review, hazard identification, risk controls, defined roles and emergency arrangements.
02
Verify and executeCompetency, equipment readiness, communications, supervision and stop-work responsibility.
03
Report and learnHazard observations, confidential reporting, inspections, audits, corrective actions and lessons learned.
04
Review and improveAnnual management review, measurable objectives, employee feedback and continuous improvement.
About contractor assurance
Qualified for
critical worksites.
Ven-Tech is supported by third-party contractor-management programs, a COR®-certified occupational health and safety management system, qualified field personnel and documented project controls.
BCCSA COR® CertifiedISNetworld Member ContractorISNetworld ESG BadgeAvetta ApprovedCognibox CertifiedAlcumus SafeContractorCSA Diving PracticesWorkSafeBC / WCB AlbertaAWWA C652-19 WorkflowsNFPA 25 Reservoir SupportNASSCO PACP CertifiedSpecialized Inspection Personnel
About employee qualifications
Competence matched
to the scope.
Personnel qualifications are verified against the assigned role and project requirements. Depending on the work, Ven-Tech teams may include personnel holding the following certifications or training.
Qualifications vary by person, role, currency and project. Final staffing is confirmed during project planning.
- 01CSWIP 3.1U / 3.2U underwater inspection personnel
- 02Diver Certification Board of Canada certified personnel
- 03Energy Safety Canada confined space, H2S and fall protection training
- 04NHI / U.S. FHWA underwater bridge inspection training
- 05AWS D3.6M underwater welding qualifications
- 06CWB / CSA welding and inspection qualifications
- 07Dive Medic Technician training aligned with applicable requirements
- 08OPITO BOSIET and HUET trained personnel
- 09Kirby Morgan dive-system maintenance training
- 10Transport Canada SVOP / MED A3 qualifications
- 11Workplace first aid, CPR, AED, BVM and oxygen training
- 12ADAS / IMCA closed-bell and specialist diving credentials
About our delivery model
From problem
to proof.
A consistent operating model keeps technical decisions, field controls and project evidence aligned.
Define the mission
Review the asset, site, history, hazards, constraints and the decision the project must support.
Select the method
Choose the crew, diving system, robotics, UAS, sensors, tooling and evidence plan.
Control the field work
Verify readiness, maintain communications and supervision, and confirm coverage as work progresses.
Make results useful
Organize observations, media, measurements, limitations and next actions for client review.
About our Canadian reach
Built in Canada.
Ready to mobilize.
Ven-Tech maintains operating locations in North Vancouver, Kelowna, Victoria, Grande Prairie, Edmonton and Regina. This regional footprint supports commercial diving, robotics and survey projects across Canada while keeping technical coordination connected to the field teams.
BCNorth Vancouver · Kelowna · Victoria
ABGrande Prairie · Edmonton
SKRegina
About Ven-Tech FAQ
About the team
behind the work.
These answers summarize Ven-Tech’s company background, service model, safety approach and project coverage.
What is Ven-Tech Subsea Inspections?+
Ven-Tech Subsea Inspections is a Canadian commercial diving, robotics and survey company established in 2014. The company supports underwater inspection, construction, reservoir, ROV, pipe, UAS, LiDAR, hydrographic and geophysical projects across Canada.
Where does Ven-Tech operate?+
Ven-Tech supports projects nationwide and maintains operating locations in British Columbia, Alberta and Saskatchewan. Mobilization, jurisdictional requirements, crew and equipment are confirmed for each project.
What makes Ven-Tech different from a conventional diving contractor?+
Ven-Tech can combine commercial divers with ROVs, pipe crawlers, confined-space robots, UAS, sonar and survey systems. This allows the project method to be selected around risk, access and the required evidence instead of forcing every problem through one platform.
How does Ven-Tech manage safety and quality?+
Ven-Tech uses a documented safety management system, project-specific hazard assessment, defined operating procedures, trained personnel, equipment controls, emergency planning, field records, audits and management review. Applicable regulations, standards and client requirements are reviewed for every scope.
What certifications and training do Ven-Tech personnel hold?+
Personnel qualifications vary by project and may include DCBC, CSWIP 3.1U and 3.2U, CWB and AWS welding credentials, bridge-inspection training, OPITO BOSIET and HUET, dive-medic, Transport Canada vessel-operator and specialist commercial-diving certifications.
What is ATHENA?+
ATHENA is Ven-Tech’s operational support framework. It helps connect project intake, HSE planning, field execution, inspection evidence, quality records and audit-ready deliverables within one coordinated workflow.
How can I request a project assessment?+
Use the Ven-Tech contact page and provide the asset, location, required work, access conditions, known hazards, schedule and desired deliverables. Drawings, photographs and previous reports help the technical team evaluate the appropriate approach.
Diving · robotics · UAS · survey
Bring us the
difficult asset.
Tell Ven-Tech what must be inspected, measured, repaired, cleaned, mapped or recovered. We’ll help define a safe, practical route from access to answer.